How it works

Wrap it, strap it, & let it fly™

  1. Step 1, Wrap It: holding the flag and its straps against a pole
    01

    Wrap It

    Hold the flag and its straps against any rail, pole, or post one to five inches around.

  2. Step 2, Strap It: wrapping the Velcro around the pole from one side of the flag attachment to the other
    02

    Strap It

    Wrap the Velcro around the pole from one side of the flag attachment to the other, and press. Nothing to tighten, nothing to lose overboard.

  3. Step 3, Let It Fly: the American flag open and flying from the strapped pole
    03

    Let It Fly

    Open it up. Tested past 60 mph through wind, sun, and spray — and it reads right from either side.

Which strap fits my pole?

StrapFits poleWhen
6" incl.1–5 inDefault — most rails, poles and posts
3" short1–2 inNarrow poles — no excess strap left over
12" long5–10 inRoll bars, thick posts, oversized rails

Flying on a vertical pole? Add a 3" strap just below the flag, wrapped straight onto the pole itself. It acts as a stopper so the flag can't slide down.

75,000 flags flying — no pole needed

Get Your American Flag